PHR Gift Cards now Available! 
Your shopping cart is currently empty.
Fuel Pulsation Damper Bypass for SC300 with 2jz, 2jzgte or 1jz
Price: $126.50 (USD)
A must-have for all Lexus SC300 owners, the PHR Bypass consists of a large 6AN Stainless Steel Braided hose with metric fittings to route from the factory fuel feedline at bottom of firewall to the rear of the factory fuel rail. This completely bypasses the OEM pulsation dampener unit; a severe restriction in the factory fuel system. Installation of this unit allows you to maximize the factory fuel system with less risk of a lean condition. Can also be supplied with an inline adapter to mount any electronic fuel pressure gauge sensor.
Installation is a breeze:
-Remove the factory rubber fuel line at the fuel filter using a 17mm wrench.
-Install the supplied metric fitting into the fuel filter while reusing factory crush washers.
-Attach the straight end of the #6 line to the metric fitting.
-Remove the factory fuel line at the rear of the fuel rail using a 17mm wrench and move it aside.
-Install supplied metric fitting into fuel rail while reusing the factory crush washer.
-Attach the 90 degree end of the #6 line.
-tighten all fittings and check for leaks, and you are done!
Installation is a breeze:
-Remove the factory rubber fuel line at the fuel filter using a 17mm wrench.
-Install the supplied metric fitting into the fuel filter while reusing factory crush washers.
-Attach the straight end of the #6 line to the metric fitting.
-Remove the factory fuel line at the rear of the fuel rail using a 17mm wrench and move it aside.
-Install supplied metric fitting into fuel rail while reusing the factory crush washer.
-Attach the 90 degree end of the #6 line.
-tighten all fittings and check for leaks, and you are done!