Checkout
View Cart (0)
PHR Products → PHR Fuel Systems and Components → PHR Fuel Hangers → PHR Triple Walbro Fuel Pump Hanger for 1993-1998 Supra

PHR Triple Walbro Fuel Pump Hanger for 1993-1998 Supra

PHR INTRODUCES THE WORLDS FIRST TRIPLE WALBRO 485/525 FUEL PUMP HANGER FOR THE MKIV SUPRA!

With a Flow Rating of over 800 lph or 267 Gallons per hour at 90psi, this pump setup is good for over 1900hp on Race Gas or 1400hp on E85!!!

Use this hanger to install 1, 2 or three fuel pumps. Compatible with the Walbro 255, Walbro 450, Walbro 525 or equivalent fuel pumps.

This triple pump hanger features:
CNC machined 6061 aluminum construction
Exact fit to the OEM tank
All applicable hardware
Proprietary sealed circular connectors potted with E85-safe epoxy
All PHR Hangers use Mil-Spec M22759/16 Tefzel wire.
Pumps can be triggered individually in staged sequence (and should be).
Anodized black! This will ensure our hangers can be used permanently in alcohol / methanol / E85 fuels with no concerns of long term corrosion.
Teflon Hoses, fully compatible with any fuel type.

The hanger will come standard with a single -8AN outlet, and a -6AN return fitting. There are two outlet ports for those who are wanting to run dual feed lines, one of which will come with a plug in it. You can add additional fittings below for running different line configurations and sizes.

Check out the installation video from Pure Function:


 

 

PHR 01011224
Making selections in the following sections may change the final product price.
Hanger will come with three 3/8 barb fittings to attach Walbro 485 or Walbro 525 pumps.
(for Walbro 485, Walbro 525 or equivalent pumps). These will already be included with the kit.
(for Walbro 255 or equivalent pumps)
Hanger will come with a -8AN outlet in one port, and a -8ORB plug in the other outlet port. You can add an additional fitting to adapt to different size feed lines.
Hanger will come with a -8AN outlet in port #1
Hanger will come with a -8AN outlet in one port, and a -8ORB plug in the other outlet port. You can add an additional fitting for running dual lines.
Hanger will come with a -8ORB plug outlet in port #2
Hanger will come with a -6AN return fitting. You can add a -8AN fitting to adapt to a -8AN return line.
Hanger will come with a -6AN return fitting.
For rubber hose. Factory return line is this size.
For rubber hose

Summary

  • 3/8" Barb fittings
  • No additional outlet fittings for port #1
  • No additional outlet fittings for port #2
  • No addtional return fitting
  • No Fuel Pumps
  • No Install Kits
  • No Wiring (Relay) Harness
$676.00 (USD)
$676.00 (USD)
  • Payment Methods
All Products Purchased from Powerhouse Racing are for motorsport purposes only and must never be installed on a vehicle driven on a public street or highway unless permitted by specific regulatory exemption. Installer/user located outside of the United States should act in accordance with their local laws and regulations.

It is the responsibility of the installer and/or user of these products to ensure that they be used in compliance with all applicable laws and regulations, and these products must not be purchased if the intent is to use them in an unlawful manner.

© 2023. All Rights Reserved.
Loading...